{"title":"RADIOMASTER","description":"","products":[{"product_id":"radiomaster-rp3-h-expresslrs-2-4ghz-nano-receiver","title":"Radiomaster RP3-H ExpressLRS 2.4GHz Nano Receiver","description":"\u003cp\u003eDesigned specifically for use with our Nexus Helicopter Flybarless control unit and compatible with all CRSF\/S.BUS enabled flight controllers the RP3-H ExpressLRS receiver comes with a built-in TCXO and an integrated housing design that makes the receiver tougher and ready to mount in modern helicopter frames. With the RP3-H receiver, you can get reliable, stable, and accurate signal reception, which enhances your flight experience and allows for superior performance even in demanding environments. The RP3-H also features an Ext-V telemetry input for compatibility with older ESCs that do not provide battery voltage telemetry via the control unit.\u003cbr\u003e\nThe RP3-H receiver uses the Skyworks SKY66112 power amplifier to increase telemetry performance, the PA provides up to 100mw of telemetry power, and antenna switching for antenna diversity. It is developed around the ESP8285 MCU and SX1281IMLTRT RF Chip, offering Lora and FLRC 2.4GHz RF links that provide incredible range and low latency. With Wifi built-in, firmware updates can be done on your craft without the need to remove the receiver.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003ePerfect for helicopters and any application that needs a rugged cased serial receiver\u003cbr\u003e\nPlug'n'play solder free RP3-H ExpressLRS receivers compatible with NEXUS Heli flight controller\u003cbr\u003e\nOptimized PCB design for better heat dissipation\u003cbr\u003e\nLNA for better receiver range\u003cbr\u003e\nPA for better telemetry range\u003cbr\u003e\nAntenna Diversity for improved signal stability and range\u003cbr\u003e\nBuilt-in a TCXO (temperature compensated crystal oscillator)\u003cbr\u003e\nAutomatically detects voltage telemetry of external battery voltage or receiver battery\/ESC BEC voltage\u003cbr\u003e\nCompatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS\u003c\/p\u003e\n\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\n\u003cp\u003eItem: RP3-H ExpressLRS 2.4GHz Nano Receiver\u003cbr\u003e\nType: ISM\u003cbr\u003e\nMCU: ESP8285\u003cbr\u003e\nRF Chip: SX1281\u003cbr\u003e\nTelemetry RF power: Max 100mW\u003cbr\u003e\nAntenna: 150mm 2.4GHz Antenna x2\u003cbr\u003e\nFrequency Range: 2.404 - 2.479 GHz\u003cbr\u003e\nMaximum receive refresh rate: 500Hz \/ F1000Hz\u003cbr\u003e\nMinimum receiver refresh rate: 25Hz\u003cbr\u003e\nWorking voltage: DC 4.5 - 8.4V\u003cbr\u003e\nBattery voltage detection range: DC 4.0 - 35V\u003cbr\u003e\nWeight: 5.1g (Including two antenna)\u003cbr\u003e\nDimension: 28mm*24mm*8mm\u003cbr\u003e\nFirmware Version: ExpressLRS v3.3.1 pre-installed\u003cbr\u003e\nFW Target: RadioMaster RP3-H Diversity 2400 RX\u003cbr\u003e\nBus interface: CRSF\/S.Bus\u003c\/p\u003e\n\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * RP3-H ExpressLRS 2.4GHz Nano Receiver\u003cbr\u003e\n2 * 150mm IPX1 2.4GHz T Antenna (installed)\u003cbr\u003e\n1 * JST-GH CRSF 4 wire Pigtail\u003cbr\u003e\n1 * JST-GH 4 wire to JST-GH CRSF cable\u003cbr\u003e\n1 * JST-GH 4 wire to single Servo pin (single dupont connectors)\u003cbr\u003e\n1 * Voltage telemetry wire\u003cbr\u003e\n1 * Quick start guide\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105606472054,"sku":"rp3H","price":29.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/1_e932576b-2489-4707-ac44-476723c2a244_900x-standard.webp?v=1781702047"},{"product_id":"tx15-max-radio-controller-elrs-m2-switchable-m1-red","title":"TX15 Max Radio Controller (ELRS \/ M2 switchable M1) RED","description":"\u003cp\u003eRadioMaster continues to redefine the open-source remote control landscape. After years of collaboration with our open-source partners and users, we are proud to introduce the TX15 MAX. Driven by the high-performance STM32 H7 chip, it’s the powerhouse behind our fastest radio ever — enabling ultra-smooth EdgeTX control, instant model switching, and lightning-quick script execution. With 4GB of flash storage and MicroSD card expansion, you’ll have virtually unlimited space for models, scripts, sounds, and themes.\u003cbr\u003e\nThe TX15 MAX features a LR1121 Semtech transceiver, supporting both 2.4GHz or 900MHz ExpressLRS (ELRS) for long-range, low-latency performance. Whether you're flying daily or operating in challenging RF environments, the TX15 MAX is built to perform. A smart balance battery circuit maximizes flight time, while the compact, foldable antenna design improves portability and ensures strong signal quality. The built-in gyro with TiltX\/TiltY functions unlocks advanced control options, allowing you to trigger switches, pan\/tilt cameras, or activate telemetry callouts with a simple tilt of your radio.\u003cbr\u003e\nEnjoy sharp visuals on the 3.5-inch IPS touchscreen with 262k color resolution and 600 nits brightness, even in sunlight. The TX15 MAX boasts AG02 CNC aluminum gimbals in anodized red, black or gold, upgraded aluminum buttons, a scroll wheel, and a carbon-fiber-look case for a premium feel. Integrated RGB LED lights around the gimbals allow customizable LUA-controlled lighting. It includes advanced cooling, a USB-C charging port, SIM connectivity, firmware updates, and fast memory access for top-tier performance. We’ve included additional switches so you can swap out the shoulder buttons with either a momentary or two-position latching switch—perfect if you prefer a traditional switch over a button. Prefer the standard model? See the TX15 Standard.\u003cbr\u003e\nStep into the future. TX15: The Future Is Here, One Step Ahead.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eBlazing-Fast Performance: The STM32 H7 chip powers our fastest radio ever.\u003cbr\u003e\nTouchscreen Display: 3.5-inch, 480 x 320 IPS touchscreen with vivid colors and sharp detail.\u003cbr\u003e\nPrecision Gimbals: the premium AG02 gimbals for enhanced smoothness.\u003cbr\u003e\nBuilt-in ExpressLRS: 2.4GHz \/ 900MHz ExpressLRS integration for reliable and long-range control.\u003cbr\u003e\nSmart Balance Battery Circuit: Maximizes battery efficiency and longevity for more flight time.\u003cbr\u003e\nPowerful, Cooling System: Low noise, high output fans and an aluminium heat sink keep your radio cool even on the hottest days.\u003cbr\u003e\nAG02 Gimbal: More than 20% reduced weight, with adjustable travel on both vertical and horizontal axis.\u003cbr\u003e\nCustomizable RGB Gimbal Light- Ring: Integrated RGB LED lights around the gimbals allow customizable LUA-controlled lighting.\u003cbr\u003e\nFoldable Antenna: Compact and easy to store without compromising signal strength.\u003cbr\u003e\nBuilt-in Microphone: For future feature expansion.\u003cbr\u003e\nBuilt-in Gyro: Trigger switches, pan\/tilt cameras, or telemetry callouts simply by tilting your radio.\u003cbr\u003e\nMemory: Integrated 4GB of onboard flash memory and external MicroSD card support.\u003cbr\u003e\nInterchangeable Shoulder Switches: Customize your controls to match your flying style. \u003c\/p\u003e\n\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\n\u003cp\u003eItem: TX15 Max Radio Controller\u003cbr\u003e\nSize: 178*168*81mm\u003cbr\u003e\nWeight: 672g (without battery)\u003cbr\u003e\nColor: Red\/ Black\/ Gold\u003cbr\u003e\nFrequency: 2.400GHz OR Sub-G 900MHz\u003cbr\u003e\nInternal RF: ELRS 2.4GHz \/ Sub-G 900MHz\u003cbr\u003e\nSupported Protocols: Express-LRS\u003cbr\u003e\nCooling Fan: Yes\u003cbr\u003e\nTransmitter Module: Built-in ELRS\u003cbr\u003e\nBuilt-in Flash Size: 4GB\u003cbr\u003e\nBuilt-in Microphone: Yes (Future expansion)\u003cbr\u003e\nBuilt-in Gyro: Yes (ICM-42607-C)\u003cbr\u003e\nMicroSD card* (Not included): 32GB\/FAT32 (Inserting a MicroSD card will disable the onboard flash)\u003cbr\u003e\nAntenna Gain: 2dB (transmit power adjustable)\u003cbr\u003e\nCurrent: 875mA at max power output\u003cbr\u003e\nVoltage Range: 6.6 - 8.4V DC\u003cbr\u003e\nRadio Firmware: EdgeTX (Transmitter) (requires version 3.0.0 or later)\u003cbr\u003e\nModule Firmware: ExpressLRS\u003cbr\u003e\nChannels: Max 16 channels (Receiver dependent)\u003cbr\u003e\nDisplay: 3.5-inch IPS touchscreen (480 x 320 resolution)\u003cbr\u003e\nBattery: 7.4V 2-cell Lithium-Polymer \/ Two 3.7V 18650 Lithium-Ion cells \/ 21700 5000mAh Battery (batteries not included)\u003cbr\u003e\nConnectivity: USB-C\u003cbr\u003e\nGimbals: AG02 CNC Hall sensor gimbals\u003cbr\u003e\nGimbal Sticks: M4\u003cbr\u003e\nUpgrade Method: USB-C (UF2)\u003cbr\u003e\nModule Bay: JR-compatible module bay for additional modules\u003c\/p\u003e\n\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * TX15 Max Radio Controller\u003cbr\u003e\n1 * Signature Carry Case\u003cbr\u003e\n1 * Short 2-position Latching Shoulder Toggle Switch Assembly\u003cbr\u003e\n1 * Short 2-position Momentary Shoulder Toggle  Switch Assembly\u003cbr\u003e\n1 * 18650 Battery Tray\u003cbr\u003e\n1 * USB-C Cable\u003cbr\u003e\n1 * Screen Protector\u003cbr\u003e\n1 * 1.5mm Hex Wrench\u003cbr\u003e\n4 * High Tension Gimbals Springs\u003cbr\u003e\n2 * Gimbal Stick Set Screw\u003cbr\u003e\n1 * Stickers Set\u003cbr\u003e\n1 * User Manual\u003cbr\u003e\n1 * Inventory Card\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105653068150,"sku":"tx15maxred","price":259.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/01_bb7ab1b9-3eb2-4677-8692-591d18af0d0b_1080x-standard.webp?v=1781702384"},{"product_id":"tx15-max-radio-controller-elrs-m2-switchable-m1-black","title":"TX15 Max Radio Controller (ELRS \/ M2 switchable M1) BLACK","description":"\u003cp\u003eRadioMaster continues to redefine the open-source remote control landscape. After years of collaboration with our open-source partners and users, we are proud to introduce the TX15 MAX. Driven by the high-performance STM32 H7 chip, it’s the powerhouse behind our fastest radio ever — enabling ultra-smooth EdgeTX control, instant model switching, and lightning-quick script execution. With 4GB of flash storage and MicroSD card expansion, you’ll have virtually unlimited space for models, scripts, sounds, and themes.\u003cbr\u003e\nThe TX15 MAX features a LR1121 Semtech transceiver, supporting both 2.4GHz or 900MHz ExpressLRS (ELRS) for long-range, low-latency performance. Whether you're flying daily or operating in challenging RF environments, the TX15 MAX is built to perform. A smart balance battery circuit maximizes flight time, while the compact, foldable antenna design improves portability and ensures strong signal quality. The built-in gyro with TiltX\/TiltY functions unlocks advanced control options, allowing you to trigger switches, pan\/tilt cameras, or activate telemetry callouts with a simple tilt of your radio.\u003cbr\u003e\nEnjoy sharp visuals on the 3.5-inch IPS touchscreen with 262k color resolution and 600 nits brightness, even in sunlight. The TX15 MAX boasts AG02 CNC aluminum gimbals in anodized red, black or gold, upgraded aluminum buttons, a scroll wheel, and a carbon-fiber-look case for a premium feel. Integrated RGB LED lights around the gimbals allow customizable LUA-controlled lighting. It includes advanced cooling, a USB-C charging port, SIM connectivity, firmware updates, and fast memory access for top-tier performance. We’ve included additional switches so you can swap out the shoulder buttons with either a momentary or two-position latching switch—perfect if you prefer a traditional switch over a button. Prefer the standard model? See the TX15 Standard.\u003cbr\u003e\nStep into the future. TX15: The Future Is Here, One Step Ahead.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eBlazing-Fast Performance: The STM32 H7 chip powers our fastest radio ever.\u003cbr\u003e\nTouchscreen Display: 3.5-inch, 480 x 320 IPS touchscreen with vivid colors and sharp detail.\u003cbr\u003e\nPrecision Gimbals: the premium AG02 gimbals for enhanced smoothness.\u003cbr\u003e\nBuilt-in ExpressLRS: 2.4GHz \/ 900MHz ExpressLRS integration for reliable and long-range control.\u003cbr\u003e\nSmart Balance Battery Circuit: Maximizes battery efficiency and longevity for more flight time.\u003cbr\u003e\nPowerful, Cooling System: Low noise, high output fans and an aluminium heat sink keep your radio cool even on the hottest days.\u003cbr\u003e\nAG02 Gimbal: More than 20% reduced weight, with adjustable travel on both vertical and horizontal axis.\u003cbr\u003e\nCustomizable RGB Gimbal Light- Ring: Integrated RGB LED lights around the gimbals allow customizable LUA-controlled lighting.\u003cbr\u003e\nFoldable Antenna: Compact and easy to store without compromising signal strength.\u003cbr\u003e\nBuilt-in Microphone: For future feature expansion.\u003cbr\u003e\nBuilt-in Gyro: Trigger switches, pan\/tilt cameras, or telemetry callouts simply by tilting your radio.\u003cbr\u003e\nMemory: Integrated 4GB of onboard flash memory and external MicroSD card support.\u003cbr\u003e\nInterchangeable Shoulder Switches: Customize your controls to match your flying style. \u003c\/p\u003e\n\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\n\u003cp\u003eItem: TX15 Max Radio Controller\u003cbr\u003e\nSize: 178*168*81mm\u003cbr\u003e\nWeight: 672g (without battery)\u003cbr\u003e\nColor: Red\/ Black\/ Gold\u003cbr\u003e\nFrequency: 2.400GHz OR Sub-G 900MHz\u003cbr\u003e\nInternal RF: ELRS 2.4GHz \/ Sub-G 900MHz\u003cbr\u003e\nSupported Protocols: Express-LRS\u003cbr\u003e\nCooling Fan: Yes\u003cbr\u003e\nTransmitter Module: Built-in ELRS\u003cbr\u003e\nBuilt-in Flash Size: 4GB\u003cbr\u003e\nBuilt-in Microphone: Yes (Future expansion)\u003cbr\u003e\nBuilt-in Gyro: Yes (ICM-42607-C)\u003cbr\u003e\nMicroSD card* (Not included): 32GB\/FAT32 (Inserting a MicroSD card will disable the onboard flash)\u003cbr\u003e\nAntenna Gain: 2dB (transmit power adjustable)\u003cbr\u003e\nCurrent: 875mA at max power output\u003cbr\u003e\nVoltage Range: 6.6 - 8.4V DC\u003cbr\u003e\nRadio Firmware: EdgeTX (Transmitter) (requires version 3.0.0 or later)\u003cbr\u003e\nModule Firmware: ExpressLRS\u003cbr\u003e\nChannels: Max 16 channels (Receiver dependent)\u003cbr\u003e\nDisplay: 3.5-inch IPS touchscreen (480 x 320 resolution)\u003cbr\u003e\nBattery: 7.4V 2-cell Lithium-Polymer \/ Two 3.7V 18650 Lithium-Ion cells \/ 21700 5000mAh Battery (batteries not included)\u003cbr\u003e\nConnectivity: USB-C\u003cbr\u003e\nGimbals: AG02 CNC Hall sensor gimbals\u003cbr\u003e\nGimbal Sticks: M4\u003cbr\u003e\nUpgrade Method: USB-C (UF2)\u003cbr\u003e\nModule Bay: JR-compatible module bay for additional modules\u003c\/p\u003e\n\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * TX15 Max Radio Controller\u003cbr\u003e\n1 * Signature Carry Case\u003cbr\u003e\n1 * Short 2-position Latching Shoulder Toggle Switch Assembly\u003cbr\u003e\n1 * Short 2-position Momentary Shoulder Toggle  Switch Assembly\u003cbr\u003e\n1 * 18650 Battery Tray\u003cbr\u003e\n1 * USB-C Cable\u003cbr\u003e\n1 * Screen Protector\u003cbr\u003e\n1 * 1.5mm Hex Wrench\u003cbr\u003e\n4 * High Tension Gimbals Springs\u003cbr\u003e\n2 * Gimbal Stick Set Screw\u003cbr\u003e\n1 * Stickers Set\u003cbr\u003e\n1 * User Manual\u003cbr\u003e\n1 * Inventory Card\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105653166454,"sku":"tx15maxblack","price":259.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/01_1080x-standard_493cab66-50eb-4bca-8e33-be8e74ea7a6c.webp?v=1781702386"},{"product_id":"tx15-max-radio-controller-elrs-m2-switchable-m1-gold","title":"TX15 Max Radio Controller (ELRS \/ M2 switchable M1) GOLD","description":"\u003cp\u003eRadioMaster continues to redefine the open-source remote control landscape. After years of collaboration with our open-source partners and users, we are proud to introduce the TX15 MAX. Driven by the high-performance STM32 H7 chip, it’s the powerhouse behind our fastest radio ever — enabling ultra-smooth EdgeTX control, instant model switching, and lightning-quick script execution. With 4GB of flash storage and MicroSD card expansion, you’ll have virtually unlimited space for models, scripts, sounds, and themes.\u003cbr\u003e\nThe TX15 MAX features a LR1121 Semtech transceiver, supporting both 2.4GHz or 900MHz ExpressLRS (ELRS) for long-range, low-latency performance. Whether you're flying daily or operating in challenging RF environments, the TX15 MAX is built to perform. A smart balance battery circuit maximizes flight time, while the compact, foldable antenna design improves portability and ensures strong signal quality. The built-in gyro with TiltX\/TiltY functions unlocks advanced control options, allowing you to trigger switches, pan\/tilt cameras, or activate telemetry callouts with a simple tilt of your radio.\u003cbr\u003e\nEnjoy sharp visuals on the 3.5-inch IPS touchscreen with 262k color resolution and 600 nits brightness, even in sunlight. The TX15 MAX boasts AG02 CNC aluminum gimbals in anodized red, black or gold, upgraded aluminum buttons, a scroll wheel, and a carbon-fiber-look case for a premium feel. Integrated RGB LED lights around the gimbals allow customizable LUA-controlled lighting. It includes advanced cooling, a USB-C charging port, SIM connectivity, firmware updates, and fast memory access for top-tier performance. We’ve included additional switches so you can swap out the shoulder buttons with either a momentary or two-position latching switch—perfect if you prefer a traditional switch over a button. Prefer the standard model? See the TX15 Standard.\u003cbr\u003e\nStep into the future. TX15: The Future Is Here, One Step Ahead.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eBlazing-Fast Performance: The STM32 H7 chip powers our fastest radio ever.\u003cbr\u003e\nTouchscreen Display: 3.5-inch, 480 x 320 IPS touchscreen with vivid colors and sharp detail.\u003cbr\u003e\nPrecision Gimbals: the premium AG02 gimbals for enhanced smoothness.\u003cbr\u003e\nBuilt-in ExpressLRS: 2.4GHz \/ 900MHz ExpressLRS integration for reliable and long-range control.\u003cbr\u003e\nSmart Balance Battery Circuit: Maximizes battery efficiency and longevity for more flight time.\u003cbr\u003e\nPowerful, Cooling System: Low noise, high output fans and an aluminium heat sink keep your radio cool even on the hottest days.\u003cbr\u003e\nAG02 Gimbal: More than 20% reduced weight, with adjustable travel on both vertical and horizontal axis.\u003cbr\u003e\nCustomizable RGB Gimbal Light- Ring: Integrated RGB LED lights around the gimbals allow customizable LUA-controlled lighting.\u003cbr\u003e\nFoldable Antenna: Compact and easy to store without compromising signal strength.\u003cbr\u003e\nBuilt-in Microphone: For future feature expansion.\u003cbr\u003e\nBuilt-in Gyro: Trigger switches, pan\/tilt cameras, or telemetry callouts simply by tilting your radio.\u003cbr\u003e\nMemory: Integrated 4GB of onboard flash memory and external MicroSD card support.\u003cbr\u003e\nInterchangeable Shoulder Switches: Customize your controls to match your flying style. \u003c\/p\u003e\n\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\n\u003cp\u003eItem: TX15 Max Radio Controller\u003cbr\u003e\nSize: 178*168*81mm\u003cbr\u003e\nWeight: 672g (without battery)\u003cbr\u003e\nColor: Red\/ Black\/ Gold\u003cbr\u003e\nFrequency: 2.400GHz OR Sub-G 900MHz\u003cbr\u003e\nInternal RF: ELRS 2.4GHz \/ Sub-G 900MHz\u003cbr\u003e\nSupported Protocols: Express-LRS\u003cbr\u003e\nCooling Fan: Yes\u003cbr\u003e\nTransmitter Module: Built-in ELRS\u003cbr\u003e\nBuilt-in Flash Size: 4GB\u003cbr\u003e\nBuilt-in Microphone: Yes (Future expansion)\u003cbr\u003e\nBuilt-in Gyro: Yes (ICM-42607-C)\u003cbr\u003e\nMicroSD card* (Not included): 32GB\/FAT32 (Inserting a MicroSD card will disable the onboard flash)\u003cbr\u003e\nAntenna Gain: 2dB (transmit power adjustable)\u003cbr\u003e\nCurrent: 875mA at max power output\u003cbr\u003e\nVoltage Range: 6.6 - 8.4V DC\u003cbr\u003e\nRadio Firmware: EdgeTX (Transmitter) (requires version 3.0.0 or later)\u003cbr\u003e\nModule Firmware: ExpressLRS\u003cbr\u003e\nChannels: Max 16 channels (Receiver dependent)\u003cbr\u003e\nDisplay: 3.5-inch IPS touchscreen (480 x 320 resolution)\u003cbr\u003e\nBattery: 7.4V 2-cell Lithium-Polymer \/ Two 3.7V 18650 Lithium-Ion cells \/ 21700 5000mAh Battery (batteries not included)\u003cbr\u003e\nConnectivity: USB-C\u003cbr\u003e\nGimbals: AG02 CNC Hall sensor gimbals\u003cbr\u003e\nGimbal Sticks: M4\u003cbr\u003e\nUpgrade Method: USB-C (UF2)\u003cbr\u003e\nModule Bay: JR-compatible module bay for additional modules\u003c\/p\u003e\n\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * TX15 Max Radio Controller\u003cbr\u003e\n1 * Signature Carry Case\u003cbr\u003e\n1 * Short 2-position Latching Shoulder Toggle Switch Assembly\u003cbr\u003e\n1 * Short 2-position Momentary Shoulder Toggle  Switch Assembly\u003cbr\u003e\n1 * 18650 Battery Tray\u003cbr\u003e\n1 * USB-C Cable\u003cbr\u003e\n1 * Screen Protector\u003cbr\u003e\n1 * 1.5mm Hex Wrench\u003cbr\u003e\n4 * High Tension Gimbals Springs\u003cbr\u003e\n2 * Gimbal Stick Set Screw\u003cbr\u003e\n1 * Stickers Set\u003cbr\u003e\n1 * User Manual\u003cbr\u003e\n1 * Inventory Card\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105653231990,"sku":"tx15maxgold","price":259.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/01_1080x-standard_d39ded06-ca3f-4e9b-855e-2c680862750a.webp?v=1781702387"},{"product_id":"tx15-radio-controller-elrs-m2-switchable-m1-iron-grey","title":"TX15 Radio Controller (ELRS \/ M2 switchable M1) IRON GREY","description":"\u003cp\u003eRadioMaster continues to redefine the open-source remote control landscape. After years of collaboration with our open-source partners and users, we are proud to introduce the TX15. Driven by the high-performance STM32 H7 chip, it’s the powerhouse behind our fastest radio ever — enabling ultra-smooth EdgeTX control, instant model switching, and lightning-quick script execution. With 4GB of flash storage and MicroSD card expansion, you’ll have virtually unlimited space for models, scripts, sounds, and themes. \u003cbr\u003e\nThe TX15 features a LR1121 Semtech transceiver, supporting both 2.4GHz or 900MHz ExpressLRS (ELRS) for long-range, low-latency performance. Whether you're flying daily or operating in challenging RF environments, the TX15 is built to perform. A smart balance battery circuit maximizes flight time, while the compact, foldable antenna design improves portability and ensures strong signal quality. The built-in gyro with TiltX\/TiltY functions unlocks advanced control options, allowing you to trigger switches, pan\/tilt cameras, or activate telemetry callouts with a simple tilt of your radio.\u003cbr\u003e\nExperience clear visuals on the 3.5-inch IPS touchscreen with 262k color resolution and 600 nits brightness, visible in sunlight. The TX15 Standard features V5.0 hall sensor gimbals in six vibrant colors. It's advanced cooling, a USB-C port for charging, SIM connectivity, firmware updates, and high-speed memory access ensure reliable performance. We’ve included additional switches so you can swap out the shoulder buttons with either a momentary or two-position latching switch—perfect if you prefer a traditional switch over a button. Want a premium upgrade? Check out the TX15 MAX. \u003cbr\u003e\nStep into the future. TX15: The Future Is Here, One Step Ahead.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eBlazing-Fast Performance: The STM32 H7 chip powers our fastest radio ever.\u003cbr\u003e\nTouchscreen Display: 3.5-inch, 480 x 320 IPS touchscreen with vivid colors and sharp detail.\u003cbr\u003e\nPrecision Gimbals: V5.0 Hall sensor gimbals\u003cbr\u003e\nBuilt-in ExpressLRS: 2.4GHz \/ Sub-G 900MHz ExpressLRS integration for reliable and long-range control.\u003cbr\u003e\nSmart Balance Battery Circuit: Maximizes battery efficiency and longevity for more flight time.\u003cbr\u003e\nPowerful, Efficient Cooling System: Low noise, high output fans and an aluminium heat sink keep your radio cool even on the hottest days.\u003cbr\u003e\nFoldable Antenna: Compact and easy to store without compromising signal strength.\u003cbr\u003e\nBuilt-in Microphone: For future feature expansion.\u003cbr\u003e\nBuilt-in Gyro: Trigger switches, pan\/tilt cameras, or telemetry callouts simply by tilting your radio.\u003cbr\u003e\nMemory: Integrated 4GB of onboard flash memory and external MicroSD card support.\u003cbr\u003e\nInterchangeable Shoulder Switches: Customize your controls to match your flying style.\u003cbr\u003e\nOptional colors: Iron Grey \/ Frost White \/ Iceberg Blue \/ Mint Mist \/ Lemon Twist Yellow \/ Hot Pink\u003c\/p\u003e\n\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\n\u003cp\u003eItem: TX15 Radio Controller\u003cbr\u003e\nSize: 178*168*81mm\u003cbr\u003e\nWeight: 605g (without battery)\u003cbr\u003e\nFrequency: 2.400GHz OR Sub-G 900MHz\u003cbr\u003e\nInternal RF: ELRS 2.4GHz \/ Sub-G 900MHz\u003cbr\u003e\nSupported Protocols: Express-LRS\u003cbr\u003e\nCooling Fan: Yes\u003cbr\u003e\nTransmitter Module: Built-in ELRS\u003cbr\u003e\nBuilt-in Flash Size: 4GB\u003cbr\u003e\nBuilt-in Microphone: Yes (Future expansion)\u003cbr\u003e\nBuilt-in Gyro: Yes (ICM-42607-C)\u003cbr\u003e\nMicroSD card (Not included): 32GB\/FAT32 (Inserting a MicroSD card will disable the onboard flash)\u003cbr\u003e\nAntenna Gain: 2dB (transmit power adjustable)\u003cbr\u003e\nCurrent: 875mA at max power output\u003cbr\u003e\nVoltage Range: 6.6 - 8.4V DC\u003cbr\u003e\nRadio Firmware: EdgeTX (Transmitter) (requires version 3.0.0 or later)\u003cbr\u003e\nModule Firmware: ExpressLRS\u003cbr\u003e\nChannels: Max 16 channels (Receiver dependent)\u003cbr\u003e\nDisplay: 3.5-inch IPS touchscreen (480 x 320 resolution)\u003cbr\u003e\nBattery: 7.4V 2-cell Lithium-Polymer \/ Two 3.7V 18650 Lithium-Ion cells \/ 21700 5000mAh Battery (batteries not included)\u003cbr\u003e\nConnectivity: USB-C\u003cbr\u003e\nGimbals: V5.0 Hall sensor gimbals (standard)\u003cbr\u003e\nGimbal Sticks: M4\u003cbr\u003e\nUpgrade Method: USB-C (UF2)\u003cbr\u003e\nModule Bay: JR-compatible module bay for additional modules\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105653363062,"sku":"tx15irongrey","price":159.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/01_4a62c39e-f27a-4396-a6f7-7ce30e0ed494_1080x-standard-1spdcd.webp?v=1781702388"},{"product_id":"tx15-radio-controller-elrs-m2-switchable-m1-frost-white","title":"TX15 Radio Controller (ELRS \/ M2 switchable M1) FROST WHITE","description":"\u003cp\u003eRadioMaster continues to redefine the open-source remote control landscape. After years of collaboration with our open-source partners and users, we are proud to introduce the TX15. Driven by the high-performance STM32 H7 chip, it’s the powerhouse behind our fastest radio ever — enabling ultra-smooth EdgeTX control, instant model switching, and lightning-quick script execution. With 4GB of flash storage and MicroSD card expansion, you’ll have virtually unlimited space for models, scripts, sounds, and themes. \u003cbr\u003e\nThe TX15 features a LR1121 Semtech transceiver, supporting both 2.4GHz or 900MHz ExpressLRS (ELRS) for long-range, low-latency performance. Whether you're flying daily or operating in challenging RF environments, the TX15 is built to perform. A smart balance battery circuit maximizes flight time, while the compact, foldable antenna design improves portability and ensures strong signal quality. The built-in gyro with TiltX\/TiltY functions unlocks advanced control options, allowing you to trigger switches, pan\/tilt cameras, or activate telemetry callouts with a simple tilt of your radio.\u003cbr\u003e\nExperience clear visuals on the 3.5-inch IPS touchscreen with 262k color resolution and 600 nits brightness, visible in sunlight. The TX15 Standard features V5.0 hall sensor gimbals in six vibrant colors. It's advanced cooling, a USB-C port for charging, SIM connectivity, firmware updates, and high-speed memory access ensure reliable performance. We’ve included additional switches so you can swap out the shoulder buttons with either a momentary or two-position latching switch—perfect if you prefer a traditional switch over a button. Want a premium upgrade? Check out the TX15 MAX. \u003cbr\u003e\nStep into the future. TX15: The Future Is Here, One Step Ahead.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eBlazing-Fast Performance: The STM32 H7 chip powers our fastest radio ever.\u003cbr\u003e\nTouchscreen Display: 3.5-inch, 480 x 320 IPS touchscreen with vivid colors and sharp detail.\u003cbr\u003e\nPrecision Gimbals: V5.0 Hall sensor gimbals\u003cbr\u003e\nBuilt-in ExpressLRS: 2.4GHz \/ Sub-G 900MHz ExpressLRS integration for reliable and long-range control.\u003cbr\u003e\nSmart Balance Battery Circuit: Maximizes battery efficiency and longevity for more flight time.\u003cbr\u003e\nPowerful, Efficient Cooling System: Low noise, high output fans and an aluminium heat sink keep your radio cool even on the hottest days.\u003cbr\u003e\nFoldable Antenna: Compact and easy to store without compromising signal strength.\u003cbr\u003e\nBuilt-in Microphone: For future feature expansion.\u003cbr\u003e\nBuilt-in Gyro: Trigger switches, pan\/tilt cameras, or telemetry callouts simply by tilting your radio.\u003cbr\u003e\nMemory: Integrated 4GB of onboard flash memory and external MicroSD card support.\u003cbr\u003e\nInterchangeable Shoulder Switches: Customize your controls to match your flying style.\u003cbr\u003e\nOptional colors: Iron Grey \/ Frost White \/ Iceberg Blue \/ Mint Mist \/ Lemon Twist Yellow \/ Hot Pink\u003c\/p\u003e\n\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\n\u003cp\u003eItem: TX15 Radio Controller\u003cbr\u003e\nSize: 178*168*81mm\u003cbr\u003e\nWeight: 605g (without battery)\u003cbr\u003e\nFrequency: 2.400GHz OR Sub-G 900MHz\u003cbr\u003e\nInternal RF: ELRS 2.4GHz \/ Sub-G 900MHz\u003cbr\u003e\nSupported Protocols: Express-LRS\u003cbr\u003e\nCooling Fan: Yes\u003cbr\u003e\nTransmitter Module: Built-in ELRS\u003cbr\u003e\nBuilt-in Flash Size: 4GB\u003cbr\u003e\nBuilt-in Microphone: Yes (Future expansion)\u003cbr\u003e\nBuilt-in Gyro: Yes (ICM-42607-C)\u003cbr\u003e\nMicroSD card (Not included): 32GB\/FAT32 (Inserting a MicroSD card will disable the onboard flash)\u003cbr\u003e\nAntenna Gain: 2dB (transmit power adjustable)\u003cbr\u003e\nCurrent: 875mA at max power output\u003cbr\u003e\nVoltage Range: 6.6 - 8.4V DC\u003cbr\u003e\nRadio Firmware: EdgeTX (Transmitter) (requires version 3.0.0 or later)\u003cbr\u003e\nModule Firmware: ExpressLRS\u003cbr\u003e\nChannels: Max 16 channels (Receiver dependent)\u003cbr\u003e\nDisplay: 3.5-inch IPS touchscreen (480 x 320 resolution)\u003cbr\u003e\nBattery: 7.4V 2-cell Lithium-Polymer \/ Two 3.7V 18650 Lithium-Ion cells \/ 21700 5000mAh Battery (batteries not included)\u003cbr\u003e\nConnectivity: USB-C\u003cbr\u003e\nGimbals: V5.0 Hall sensor gimbals (standard)\u003cbr\u003e\nGimbal Sticks: M4\u003cbr\u003e\nUpgrade Method: USB-C (UF2)\u003cbr\u003e\nModule Bay: JR-compatible module bay for additional modules\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105653592438,"sku":"tx15frostwhite","price":159.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/01_1080x-standard.webp?v=1781702390"},{"product_id":"radiomaster-2s-7-4v-6200mah-lipo-battery-for-tx15-tx15max-tx16s","title":"Radiomaster 2S 7.4V 6200mAh Lipo Battery (for TX15, TX15MAX, TX16S...)","description":"\u003cp\u003eFly all day. Literally! Enjoy unparalleled radio endurance with the RadioMaster 2S 7.4V 6200mAh LiPo battery.\u003cbr\u003e\nSpecification\u003c\/p\u003e\n\n\u003cp\u003eItem: 2S 7.4V 6200mAh LiPo Battery\u003cbr\u003e\nNominal Voltage: 7.4V\u003cbr\u003e\nCapacity: 6200mAh\u003cbr\u003e\nWatt Hours: 45.88wh\u003cbr\u003e\nConnector: JST-XH and XT30\u003cbr\u003e\nCharge current: Max 2A\u003cbr\u003e\nDimensions: 85mm x 50mm x 21mm\u003cbr\u003e\nWeight: 203g\u003cbr\u003e\nFits RadioMaster TX15, TX15MAX, TX16S, Boxer...\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105653854582,"sku":"liporadiomaster6200","price":35.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/hp0157-batt-6200-2s-1000x1000-2_1080x-standard.webp?v=1781702393"},{"product_id":"radiomaster-2-4ghz-rm-4in1-module","title":"Radiomaster 2.4GHz RM 4IN1 Module","description":"\u003cp\u003eThe RadioMaster 4IN1 external module is a multi-protocol module that integrates CC2500, NRF24L01, A7105 and CYRF6936 RF chips. Designed for OpenTX and EdgeTX systems, the RM 4IN1 module allows the radio to connect with most mainstream protocols on the market.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eUp to 20dBm power output\u003cbr\u003e\nCompatible with more than 70 RF Protocols\u003cbr\u003e\nWireless trainer function\u003cbr\u003e\nFor Zorro, Boxer, TX16S MKII, TX12 MKII, TX15, TX15MAX and more\u003c\/p\u003e\n\n\u003cp\u003eSpecification\u003c\/p\u003e\n\n\u003cp\u003eItem: RM 4IN1 Module\u003cbr\u003e\nOperational voltage: 4.5-8.4V\u003cbr\u003e\nOperational frequency: 2.4G ISM band (2400mHz - 2483mHz)\u003cbr\u003e\nRF Chipsets: CC2500, NRF24L01, A7105 and CYRF6936\u003cbr\u003e\nOperational current:≈100mA\u003cbr\u003e\nRF Gain: +20dBm\u003cbr\u003e\nWeight: 30g (without antenna)\u003cbr\u003e\nDimension: 73*42*22mm (without antenna)\u003c\/p\u003e\n\n\u003cp\u003eCompatible with more than 70 RF protocols\u003cbr\u003e\nRM 4IN1 is compatible with more than 70 RF protocols, including DSMX, Flysky, SFHSS, HiTec, HoTT, OMP, Radiolink, Frsky and many more.\u003cbr\u003e\nWireless trainer function\u003cbr\u003e\nWhen used in conjunction with a suitable EdgeTX or OpenTX compatible radio such as the TX16s, TX12 or Zorro the RM 4in1 module can be used as a wireless trainer link to a student radio such as another TX16s, TX12, Zorro or any other radio capable of transmitting DSMX, Frsky or Flysky protocols.\u003cbr\u003e\nFCC Version and EU LBT Version are Available\u003cbr\u003e\nCurrently, we provide the standard FCC version and the EU LBT version. FCC Version supports all MPM protocols. And EU LBT Version is limited to LBT compliant protocols FrSKY X\/X2 LBT, HoTT LBT and DSMX.\u003cbr\u003e\nNANO \u0026amp; JR Adapter\u003cbr\u003e\nThe RadioMaster 4IN1 module is a nano module by default. A JR adapter is included as standard. Support Zorro, Boxer, TX16S MKII, TX12 MKII and more.\u003cbr\u003e\nPackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * RM 4IN1 Module\u003cbr\u003e\n1 * JR Adapter\u003cbr\u003e\n1 * Stick Antenna\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105653920118,"sku":"HP0157.4IN1RF-LBT","price":69.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/hp0157-4in1rf-3_1080x-standard.webp?v=1781702394"},{"product_id":"radiomaster-er6-2-4ghz-elrs-pwm-receiver","title":"Radiomaster ER6 2.4GHz ELRS PWM Receiver","description":"\u003cp\u003eThe RadioMaster ER series of PWM receivers are based on the revolutionary ExpressLRS system. It offers high performance, high reliability, flexible configuration, fast response speed and ultra-long range bringing you brand new experience with your hobby.\u003cbr\u003e\nThe ER6 ELRS receiver has been specially designed for fixed-wing users. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. A 4-wire CRSF interface is provided to facilitate later expansion of telemetry sensors. The ER6 features a dual-antenna with telemetry power up to 100mw. The receiver shell adopts one-piece molding process with high structural strength.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eBased on the Revolutionary ExpressLRS System\u003cbr\u003e\nHigh performance, high reliability, flexible configuration, fast response speed and ultra-long range\u003cbr\u003e\nSupport 6 PWM Channels\u003cbr\u003e\nOptimized ground up PCB design\u003cbr\u003e\nAutomatically voltage telemetry of external battery voltage or built-in receiver voltage\u003cbr\u003e\nSupports Wi-Fi updates and WEBUI configuration\u003cbr\u003e\nHigh quality 2.54 mm connector\u003cbr\u003e\nStandard 20 cm High Sensitivity Antenna\u003cbr\u003e\nReserve 4pin CRSF input port\u003cbr\u003e\nThe shell adopts one-piece molding process with high structural strength\u003cbr\u003e\nFor fixed-wing aircraft and more\u003cbr\u003e\nCompatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS\u003c\/p\u003e\n\n\u003cp\u003eSpecification\u003c\/p\u003e\n\n\u003cp\u003eItem: ER6 2.4GHz ELRS PWM Receiver\u003cbr\u003e\nPower supply: DC 4.5 - 8.4V\u003cbr\u003e\nAntenna type: 20cm high sensitivity dual antenna\u003cbr\u003e\nWireless protocol: ExpressLRS 3.3.0 pre-installed\u003cbr\u003e\nOutput channel: 6CH PWM\u003cbr\u003e\nSerial Output: CRSF \/ Sbus\u003cbr\u003e\nTelemetry power: maximum 100mw (LUA Adjustable)\u003cbr\u003e\nTelemetry Battery voltage detection range: DC 4.0 - 35V\u003cbr\u003e\nBus interface: CRSF\u003cbr\u003e\nWeight: 14.5 grams\u003cbr\u003e\nDimensions: 43*25*15mm\u003cbr\u003e\nFirmware: Device Category: Radiomaster 2.4Ghz \/ Device: ER6 2.4GHz Diversity+6xPWM RX\u003c\/p\u003e\n\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * ER6 2.4GHz ELRS PWM Receiver\u003cbr\u003e\n1 * Voltage telemetry wire (Type-B)\u003cbr\u003e\n1 * CRSF wire\u003cbr\u003e\n1 * ELRS- RX- SBUS wire\u003cbr\u003e\n1 * User Card\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105654051190,"sku":"HP0157.RX-ER6-LBT","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/er6-1_1080x-standard.webp?v=1781702395"},{"product_id":"radiomaster-er8-2-4ghz-elrs-pwm-receiver","title":"Radiomaster ER8 2.4GHz ELRS PWM Receiver","description":"\u003cp\u003eThe RadioMaster ER series of PWM receivers are based on the revolutionary ExpressLRS system. It offers high performance, high reliability, flexible configuration, fast response speed and ultra-long range bringing you brand new experience with your hobby.\u003cbr\u003e\nThe Radiomaster ER8 receiver has been specially designed for fixed-wing users. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. A 4-wire CRSF interface is provided to facilitate later expansion of telemetry sensors. The ER8 features a dual-antenna with telemetry power up to 100mw. The receiver shell adopts one-piece molding process with high structural strength.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eBased on the Revolutionary ExpressLRS System\u003cbr\u003e\nHigh performance, high reliability, flexible configuration, fast response speed and ultra-long range\u003cbr\u003e\nSupport 8 PWM Channels\u003cbr\u003e\nOptimized ground up PCB design\u003cbr\u003e\nAutomatically voltage telemetry of external battery voltage or built-in receiver voltage\u003cbr\u003e\nSupports Wi-Fi updates and WEBUI configuration\u003cbr\u003e\nHigh quality 2.54 mm connector\u003cbr\u003e\nStandard 20 cm High Sensitivity Antenna\u003cbr\u003e\nReserve 4pin CRSF input port\u003cbr\u003e\nShell adopts one-piece molding process with high structural strength\u003cbr\u003e\nFor fixed-wing aircraft and more\u003cbr\u003e\nCompatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS\u003c\/p\u003e\n\n\n\u003cp\u003eSpecification\u003c\/p\u003e\n\n\u003cp\u003eItem: ER8 2.4GHz ELRS PWM Receiver\u003cbr\u003e\nPower supply: DC 4.5 - 8.4V\u003cbr\u003e\nAntenna type: 20cm high sensitivity antenna\u003cbr\u003e\nWireless protocol: ExpressLRS 3.3.0 pre-installed\u003cbr\u003e\nOutput channel: 8CH PWM\u003cbr\u003e\nSerial Output: CRSF \/ Sbus\u003cbr\u003e\nTelemetry power: maximum 100mw (LUA Adjustable)\u003cbr\u003e\nBattery voltage detection range: DC 4.0 - 35V\u003cbr\u003e\nBus interface: CRSF\u003cbr\u003e\nWeight: 16.5 grams\u003cbr\u003e\nSize: 43*30*15mm\u003cbr\u003e\nFirmware: Device Category: Radiomaster 2.4Ghz \/ Device: RadioMaster ER8 2.4GHz Diversity+8xPWM RX\u003c\/p\u003e\n\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * ER8 2.4GHz ELRS PWM Receiver\u003cbr\u003e\n1 * Voltage telemetry wire (Type-B)\u003cbr\u003e\n1 * CRSF wire\u003cbr\u003e\n1 * ELRS- RX- SBUS wire\u003cbr\u003e\n1 * User Card\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105654215030,"sku":"HP0157.RX-ER8-LBT","price":35.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/er8-1_1080x-standard.webp?v=1781702396"},{"product_id":"radiomaster-expresslrs-usb-uart-flasher-v2","title":"RadioMaster ExpressLRS USB UART Flasher V2","description":"\u003cp\u003eUpgrade your ELRS firmware with ease using our simple and effective tool. The new V2 version features a USB-C interface, enabling you to connect the tool to your PC via cable. The new power button allows effortless power cycling with a single press, eliminating the need to struggle with cables while holding down buttons. Our streamlined design makes preparing your receiver for a firmware update faster, easier, and more efficient than ever!\u003cbr\u003e\nWhen it comes to updating your ELRS receivers, you're faced with two options: Wi-Fi or Serial Port. While Wi-Fi upgrading may seem convenient, it can be unreliable due to network instability. This can result in a bad flash, requiring recovery with a UART tool. That's where the V2 ExpressLRS USB UART Flasher comes in, offering a reliable and easy solution for your firmware upgrade needs.\u003cbr\u003e\nWith the RadioMaster V2 ExpressLRS USB UART Flasher, your wireless connection won't be a concern. This dongle is specifically designed for ELRS receiver serial port upgrades, providing a reliable and easy solution for flashing or recovering receivers with a bad flash. \u003cbr\u003e\nOur USB flashing tool is a versatile solution, not limited to ELRS serial port upgrades. It comes with a range of connection options, allowing easy connection to our entire range of receivers. By switching between 3.3v and 5v, it can also be used for other devices requiring a UART interface. This versatility makes it a valuable addition to your toolkit, catering to all your firmware upgrade needs.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eUpgraded USB-C interface\u003cbr\u003e\nPower button for easy ON\/OFF power cycling\u003cbr\u003e\nReverse polarity protection\u003cbr\u003e\nOver-voltage protection \u003cbr\u003e\nSwitchable power supply between 3.3V and 5V\u003cbr\u003e\nStandard 2.54mm pins\u003cbr\u003e\nRM-CRSF JST-GH port for simple plug-n-play connection with RadioMaster ER series receivers\u003cbr\u003e\nPin sockets included\u003cbr\u003e\nDupont cables for convenient testing\u003c\/p\u003e\n\n\u003cp\u003eCompatible Receivers\u003cbr\u003e\nUsing 2.54mm pin output and spring-loaded pin adapter or Test hook adapters:\u003c\/p\u003e\n\n\u003cp\u003eAll RP SERIES ELRS RECEIVERS\u003c\/p\u003e\n\n\u003cp\u003eUsing regular 2.54mm pin output (Servo plugs):\u003c\/p\u003e\n\n\u003cp\u003eER3C-i 2.4GHz ELRS PWM Receiver\u003cbr\u003e\nER5C-i 2.4GHz ELRS PWM Receiver\u003cbr\u003e\nER4 2.4GHz ELRS PWM Receiver\u003cbr\u003e\nER5A 2.4GHz PWM Receiver\u003cbr\u003e\nER5A V2 2.4GHz PWM Receiver\u003cbr\u003e\nER5C 2.4GHz PWM Receiver\u003cbr\u003e\nER5C V2 2.4GHz PWM Receiver\u003cbr\u003e\nER6G \u0026amp; ER6GV ELRS PWM Receiver\u003c\/p\u003e\n\n\u003cp\u003ePlease note: The second channel is repurposed as a TX for the serial port tool's RX port, while the third channel is repurposed as an RX connected to the serial port tool's TX port.\u003cbr\u003e\nFirmware upgraded by RM-CRSF interface output:\u003c\/p\u003e\n\n\u003cp\u003eER6 2.4GHz ELRS PWM Receiver\u003cbr\u003e\nER8 2.4GHz ELRS PWM Receiver\u003cbr\u003e\nER8G \u0026amp; ER8GV ELRS PWM Receiver\u003c\/p\u003e\n\n\u003cp\u003ePlease note: The above receivers can be connected to the receiver's CRSF port using a 4-wire CRSF cable.\u003cbr\u003e\nFirmware upgrade instructions\u003c\/p\u003e\n\n\u003cp\u003eConnect the Serial Port Cable with the receiver\u003cbr\u003e\nConnect to the computer with a USB extension cable, press the receiver's BOOT button, then press the POWER button on the serial tool\u003cbr\u003e\nFollow the ELRS upgrade tool's instructions to complete the upgrade\u003c\/p\u003e\n\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * RadioMaster ExpressLRS USB UART Flasher V2\u003cbr\u003e\n1 * Pogo Probe\u003cbr\u003e\n1 * CRSF Wire \u003cbr\u003e\n1 * 2.54mm Serial Port Cable - Type B\u003cbr\u003e\n1 * Serial Port Test Hook - White\u003cbr\u003e\n1 * Serial Port Test Hook - Green\u003cbr\u003e\n1 * Serial Port Test Hook - Red\u003cbr\u003e\n1 * Serial Port Test Hook - Black\u003cbr\u003e\n1 * User Card\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105654280566,"sku":"HP0157.USBUART-V2","price":18.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/02_330f371f-c326-4405-94a5-7a80049858a7_1080x-standard.webp?v=1781702397"},{"product_id":"radiomaster-large-carry-case-for-tx16s-mkii","title":"Radiomaster Large Carry Case for TX16S MKII","description":"\u003cp\u003eKeep your TX16 safe in style with the official RadioMaster carry case. This case will carry your radio and other accessories such as FPV goggles to save on space and looks great. The internal lining is soft and padded to resist scratching and protect the radio. The top of the case has a zipper section to store accessories.\u003cbr\u003e\nNOTE: TX16S units must use a folding handle to fit this case.\u003cbr\u003e\nSpecification\u003c\/p\u003e\n\n\u003cp\u003eItem: Radio Carry Case Large\u003cbr\u003e\nColor: Grey\u003cbr\u003e\nMaterial: Fabric\u003cbr\u003e\nSize: 33*23.5*12cm\u003c\/p\u003e\n\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * TX16S Radio Carry Case Large\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105654346102,"sku":"HP0157.TX16S-LCASE","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/1_f37e23c6-7249-4a99-8fbb-6bc093c762cb_1080x-standard.jpg?v=1781702399"},{"product_id":"radiomaster-switch-nut-tool","title":"RadioMaster Switch Nut Tool","description":"\u003cp\u003eThe RadioMaster Switch Nut Tool is a versatile and durable tool designed for effortlessly tightening or loosening switch collets on RC radios. It includes two sizes to accommodate various switch nut sizes across different radios. Simply loosen the two set screws to flip the tool within its anodized aluminum handle for seamless use. For a pro-level toolbox, keep one tool in each color, ensuring quick access to both sizes!\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eComfortable Grip: Designed with a larger handle for better grip and ease of use.\u003cbr\u003e\nHigh-Quality Build: Constructed from precision-machined aluminum for long-lasting durability.\u003cbr\u003e\nColor Options: Available in red or black anodized finishes.\u003cbr\u003e\nReversible Tool Head: Switch between two sizes, works with a variety of toggle switches.\u003c\/p\u003e\n\n\u003cp\u003eSpecification\u003c\/p\u003e\n\n\u003cp\u003eItem: RadioMaster Switch Nut Tool\u003cbr\u003e\nColor: Red or Black\u003cbr\u003e\nSize: 54*20mm\u003cbr\u003e\nWeight: 20g\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105654378870,"sku":"HP0157.0097-R","price":10.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/01_d1edbb1e-4cab-4dcb-aad4-00d9cc6f8186_1080x-standard.webp?v=1781702399"},{"product_id":"radiomaster-optional-se-sf-3-position-assembly-for-tx15-radio-tx15max","title":"Radiomaster Optional SE\/SF 3 Position Assembly for TX15 Radio \/ TX15Max","description":"\u003cp\u003eThe SE and SF three-position switch accessory for the TX15 is mounted on a small PCB with included cables. These plug-and-play switches make installation easy and include the switch nuts, so you have everything needed to replace your switches. \u003cbr\u003e\nThis product is compatible with TX15. \u003cbr\u003e\nPackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * SE 3 Position Switch Assembly \u003c\/p\u003e\n\n\u003cp\u003eor\u003c\/p\u003e\n\n\u003cp\u003e1 * SF 3 Position Switch Assembly \u003c\/p\u003e\n\n\u003cp\u003eor\u003c\/p\u003e\n\n\u003cp\u003e1 set of SE \u0026amp; SF 3 Position Switch Assembly\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105654411638,"sku":"RM0157.TX15-SESF-3P","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/tx15_-fe_1080x-standard.webp?v=1781702401"},{"product_id":"radiomaster-tx15-radio-rear-grip","title":"Radiomaster TX15 Radio Rear Grip","description":"\u003cp\u003ePackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * TX15 Radio Rear Grip\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105654509942,"sku":"RM0157.TX15-GRIP","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/tx15_-fe_1080x-standard-4c45r4.webp?v=1781702402"},{"product_id":"radiomaster-er6g-er6gv-2-4ghz-elrs-pwm-receiver","title":"Radiomaster ER6G \u0026 ER6GV 2.4GHz ELRS PWM Receiver","description":"\u003cp\u003eThe RadioMaster ER series of PWM receivers are based on the revolutionary ExpressLRS system. It offers high performance, high reliability, flexible configuration, fast response speed and ultra-long range bringing you brand new experience with your hobby.\u003cbr\u003e\nThe ER6G \u0026amp; ER6GV receiver have been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. Both ER6G \u0026amp; ER6GV feature a dual-antenna with telemetry power up to 50mw and can work stably with a 1S Lipo receiver battery.\u003cbr\u003e\nThe ER6G Receiver has the same functionality as the ER6GV only without a built in Vario for competitions that prohibit the use of a Vario or simply for users who do not need a vario on their receiver.\u003cbr\u003e\nFeatures\u003c\/p\u003e\n\n\u003cp\u003eBased on the Revolutionary ExpressLRS System\u003cbr\u003e\nHigh performance, high reliability, flexible configuration, fast response speed and ultra-long range\u003cbr\u003e\nSupport 6 PWM Channels\u003cbr\u003e\nOptimized ground up PCB design\u003cbr\u003e\nAutomatically voltage telemetry of external battery voltage or built-in receiver voltage\u003cbr\u003e\nER6GV Receiver is built-in high-precision air pressure sensor (Vario)\u003cbr\u003e\nSupports Wi-Fi updates and WEBUI configuration\u003cbr\u003e\nHigh quality 2.54 mm connector\u003cbr\u003e\nStandard 15 cm High Sensitivity Antenna\u003cbr\u003e\nFor fixed-wing aircraft and gliders\u003cbr\u003e\nCompatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS\u003c\/p\u003e\n\n\n\u003cp\u003eSpecification (ER6G)\u003c\/p\u003e\n\n\u003cp\u003eItem: ER6G 2.4GHz ELRS PWM Receiver\u003cbr\u003e\nPower supply: DC 3.5 - 8.4V\u003cbr\u003e\nAntenna type: 15cm high sensitivity antenna\u003cbr\u003e\nWireless protocol: ExpressLRS 3.3.0 pre-installed\u003cbr\u003e\nOutput channel: 6CH PWM\u003cbr\u003e\nTelemetry power: maximum 50mw (LUA Adjustable)\u003cbr\u003e\nBattery voltage detection range: DC 3.0 - 26V\u003cbr\u003e\nWeight: 5.0 grams\u003cbr\u003e\nDimensions: 42*13*8mm\u003cbr\u003e\nFirmware: Device Category: Radiomaster 2.4Ghz \/ Device: RadioMaster ER6-G 2.4GHz Diversity+6xPWM RX\u003c\/p\u003e\n\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\n\u003cp\u003e1 * ER6G or ER6GV 2.4GHz ELRS PWM Receiver\u003cbr\u003e\n1 * Voltage telemetry wire (Type-A)\u003cbr\u003e\n2 * Heat-shrink tube\u003cbr\u003e\n1 * User Card\u003c\/p\u003e","brand":"Hubtech-RC","offers":[{"title":"Default Title","offer_id":58105654608246,"sku":"HP0157.RX-ER6-G-LBT","price":35.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/2547\/6214\/files\/er6g-1_1080x-standard.webp?v=1781702403"}],"url":"https:\/\/7tn0ci-jr.myshopify.com\/collections\/radiomaster.oembed","provider":"Hubtech-RC","version":"1.0","type":"link"}